Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: G1 MIPS, G1
- ATTACHMENT: G1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate
To determine correct size measure head circumference 2.5cm above eyebrows.
NOTE: Head circumference measurements falling between two sizes should consider ordering the smaller size helmet.
Helmet should sit level on the head at eyebrow level. Straps should fit close on the cheek and behind the ear. Buckle should allow opening of mouth while not being too loose.
|Black / Small
|Black / Medium
|Black / Large
|Yellow / Small
|Yellow / Medium
|Yellow / Large